Errors that start with "GRN_SCHD_" are displayed when errors relating to Schedule occur.

• Cause
  The appointment was specified incorrectly, or the appointment no longer exists.
• Countermeasure
  Confirm the target appointment.

• Cause
  The currently logged-in user is not permitted to view this appointment.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  A tentative appointment that has already been fixed has been specified.
• Countermeasure
  Confirm the target tentative appointment.

• Cause
  Cannot set because of the following reason.
  • The combination of start time and ending time data is not valid.
• Countermeasure
  Confirm whether or not the date is correct.

• Cause
  Cannot set because of the following reason.
  • The combination of start time and ending time data is not valid.
• Countermeasure
  Confirm whether or not the end date and time are correct.

• Cause
  Cannot set because of the following reason.
  • The combination of start time and ending time data is not valid.
• Countermeasure
  Confirm whether or not the date is correct.

• Cause
  Cannot set because of the following reason.
  • The combination of start time and ending time data is not valid.
• Countermeasure
  Confirm whether or not the start time is correct.

• Cause
  Cannot set because of the following reason.
  • The combination of start time and ending time data is not valid.
• Countermeasure
  Confirm whether or not the end date and time are correct.

• Cause
  Cannot set because of the following reason.
  • The start time is later than the end time.
  • The combination of start and end times is wrong.
• Countermeasure
  Confirm whether or not the start and ending times are correct.

• Cause
  Cannot set because of the following reason.
  • The combination of start date and time and end date and time data is not valid.
• Countermeasure
  Confirm whether or not the start date and time are correct.

• Cause
  Cannot set because of the following reason.
  • The combination of start time and ending time data is not valid.
• Countermeasure
  Confirm whether or not the end date and time are correct.

• Cause
  Cannot set because of the following reason.
  • The combination of data for date and time is invalid.
  • The end date precedes the start date.
• Countermeasure
  Confirm whether or not the start or end date and time are correct.

• Cause
  You are trying to add a tentative appointment without proposing a date and time for the tentative appointment.
• Countermeasure
  Confirm the proposed date and time of the tentative appointment.

• Cause
  You are attempting to set or change an appointment without entering the date.
• Countermeasure
  Confirm the details entered for the date.

• Cause
  The repeating period is set so that it can only be added until the following limit: ***.
• Countermeasure
  Set a repeating period within the range.

• Cause
  Repeating conditions have not been entered.
• Countermeasure
  Enter the repeating conditions, and add.

• Cause
  The operation cannot be carried out because the repeating change classification has not been selected.
• Countermeasure
  Confirm the selection details of the change classification of the repeating appointment, and try again.

• Cause
  The operation cannot be carried out because the conditions for deleting repeating appointments have not been selected.
• Countermeasure
  Confirm the selection details of the delete conditions of the repeating appointment, and try again.

• Cause
  Conditions for deleting a shared appointment have not been selected.
• Countermeasure
  Confirm the delete conditions of the shared appointment, and try again.

• Cause
  When changing a future appointment, the repeating start day cannot be changed.
• Countermeasure
  Make the start day the following date, and then change ***.

• Cause
  One or more attendees for this appointment are required to add or change the appointment.
• Countermeasure
  Select one or more attendees.

• Cause
  The comment was specified incorrectly, or the comment no longer exists.
• Countermeasure
  Confirm the target comment.

• Cause
  Only the commenter can delete a comment.
• Countermeasure
  Ask the commenter to delete the comment.

• Cause
  There are no comment details.
• Countermeasure
  Enter the details of the comment.

• Cause
  The number of data items entered in the CSV file does not match the fixed number of items.
• Countermeasure
  Confirm the number of items in the CSV file data and the details.

• Cause
  Cannot find the specified CSV file.
• Countermeasure
  Specify the file correctly.

• Cause
  The user or organization whose schedule will be exported has not been selected.
• Countermeasure
  Confirm the selection details of the user and organization, and try again.

• Cause
  The user or organization for which the statistics will be performed has not been selected.
• Countermeasure
  Confirm the selection details of the user and organization, and try again.

• Cause
  The following menu has already been added: ***.
• Countermeasure
  Add as a menu that has not been added or change.

• Cause
  The appointment type name has not been selected.
• Countermeasure
  Select the appointment type name.

• Cause
  The name of the appointment type was specified incorrectly, or the name of the appointment type no longer exists.
• Countermeasure
  Confirm the target appointment type.

• Cause
  A user, organization, or role has not been specified.
• Countermeasure
  Confirm whether or not a target of the user rights has been selected.

• Cause
  The user specified is not the logged-in user.
• Countermeasure
  Confirm whether or not the target user is a login user.

• Cause
  A user, organization, or role for which the user rights will be set has not been selected.
• Countermeasure
  Select a user, organization, or role.

• Cause
  A target has not been selected in the user rights settings.
• Countermeasure
  Set the target of the user rights.

• Cause
  The security model was specified incorrectly, or an unexpected character has been used in the security model settings.
• Countermeasure
  Confirm the value you want to specify for the security model.

• Cause
  A target has not been selected in the user rights settings.
• Countermeasure
  Select a user, organization, or role.

• Cause
  A user, organization, or role for which the user rights will be set has not been selected.
• Countermeasure
  Select a user, organization, or role.

• Cause
  A user who does not have the view privilege cannot be granted other privileges.
• Countermeasure
  Confirm whether or not "View" is selected in the user rights settings.

• Cause
  The currently logged in user cannot view this appointment because the user does not have user right for this appointment's user or organization.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The currently logged-in user is not permitted to add for this user/organization/facility.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The currently logged-in user is not permitted to change this user, organization, or facility.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The currently logged-in user is not permitted to delete appointments for this user, organization, or facility.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The currently logged in user is not permitted to post comments on this appointment.
  Add, change, or delete privileges are required.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The end time precedes the start time.
• Countermeasure
  Confirm the time period.

• Cause
  A user, organization, or facility to confirm the appointment has not been selected.
• Countermeasure
  Confirm whether or not the target user, organization, and facility are selected.

• Cause
  There is no organization, facility group, or group that has the group ID specified in the appointment overview display.
• Countermeasure
  Confirm the target organization and facility group's group ID.

• Cause
  An appointment that you are attending already has been added.
• Countermeasure
  Confirm the target appointment.

• Cause
  The currently logged-in user is not permitted to add, change, or delete for this appointment.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The date to be deleted has not been selected.
• Countermeasure
  Confirm the date to be deleted.

• Cause
  The tentative appointment was specified incorrectly, or the tentative appointment no longer exists.
• Countermeasure
  Confirm the date of the target tentative appointment.

• Cause
  The currently logged-in user is not permitted to view the appointments of this user, organization, facility, or facility group.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The organization option has been selected in the daily or weekly group display's report, but the organization, group, or facility has not been selected.
• Countermeasure
  Select the organization, My group, or facility.

• Cause
  The currently logged-in user is not permitted to perform actions on the appointments of this user, organization, facility, or facility group.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  When importing user rights from a CSV file, users, organizations, facility types, and facility groups other than the pre-determined users, organizations, facility types, and facility groups cannot be specified in the first item.
• Countermeasure
  Set the following user, organization, role, facility type, and facility group.
  • user
  • group
  • role
  • facility
  • facilitygroup

• Cause
  The following type cannot be used: ***.
• Countermeasure
  Confirm the details of the settings target you are specifying.

• Cause
  The following type cannot be used: ***.
• Countermeasure
  Set the following user, organization, role, facility type, and facility group.
  • user
  • group
  • role
  • facility
  • facilitygroup

• Cause
  The following type cannot be used: ***.
• Countermeasure
  Confirm the details of the settings target you are specifying.

• Cause
  When importing user rights from a CSV file, characters other than the pre-determined characters cannot be specified in the fourth item.
• Countermeasure
  Set the following user rights.
  • R
  • A
  • M
  • D

• Cause
  Operational administrative privileges are required to perform this operation.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  Cannot set because of the following reason.
  • The combination of repeating condition and period is not correct.
• Countermeasure
  Confirm whether or not the date is correct.

• Cause
  You are attempting to add an appointment without selecting a date and time.
• Countermeasure
  Confirm whether or not the target date and time has been selected.

• Cause
  An invalid parameter was found while processing.
• Countermeasure
  Please contact our official partners or your vendor.

• Cause
  Invalid value found in the "Attendees", "Organizations", or the "Facilities" fields.
• Countermeasure
  Enter the correct value in the "Attendees", "Organizations", or the "Facilities" fields and try again.

• Cause
  You are attempting to add or change without entering the facility name.
• Countermeasure
  Enter the facility, and then add or change.

• Cause
  You are attempting to add or change without entering the facility code.
• Countermeasure
  Enter the facility code, and then add or change.

• Cause
  The facility was specified incorrectly, or the specified facility no longer exists.
• Countermeasure
  Confirm the target facility.

• Cause
  You are attempting to add or change without entering the facility group name.
• Countermeasure
  Enter the facility group name, and then add or change.

• Cause
  The facility group was specified incorrectly, or the specified facility group no longer exists.
• Countermeasure
  Confirm the target facility group.

• Cause
  The reservation period is set to only be added until the following limit: ***.
• Countermeasure
  Set a reservation period within the range.

• Cause
  You are attempting to set or change an appointment without entering the start time or the ending time.
• Countermeasure
  Confirm the details entered for the start time and the ending time.

• Cause
  When reserving a facility, you must set the time period so that it does not overlap other appointments.
• Countermeasure
  Confirm the appointment for the following facility: ***.

• Cause
  The facility was specified incorrectly, or the specified facility no longer exists.
• Countermeasure
  Confirm the target facility.

• Cause
  The facility group was specified incorrectly, or the specified facility group no longer exists.
• Countermeasure
  Confirm the target facility group.

• Cause
  A facility with the same facility code as the following facility code has been added already: ***.
• Countermeasure
  A duplicate facility code cannot be set.
  Specify a unique facility code.

• Cause
  The order has not been specified.
• Countermeasure
  Specify an order.

• Cause
  The order has not been specified.
• Countermeasure
  Specify an order.

• Cause
  The currently logged-in user is not permitted to change or delete for this appointment.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  When reserving a facility, you must set a (time) period that does not overlap another (time) period.
• Countermeasure
  Confirm the target facility appointment.

• Cause
  You cannot use the facility group code "***" because it has been already registered.
• Countermeasure
  You cannot set a duplicate facility group code.
  Specify a unique facility group code.

• Cause
  The facility reservation (time) period is set so that it can only be added up to the following maximum: n minutes.
• Countermeasure
  Set a reservation time within the range.

• Cause
  You are attempting to add or change a facility group without entering its code.
• Countermeasure
  Enter the facility group code.

• Cause
  The hierarchy of facility groups cannot exceeds the limit of three levels.
• Countermeasure
  Set facility groups within the hierarchy limit.

• Cause
  A required item, *** or ***, has not been specified.
• Countermeasure
  Specify a non-empty string or a * to omit it.

• Cause
  Both *** and *** are being omitted by specifying * as their value.
• Countermeasure
  Specify *** while changing the organization information, and specify *** while creating an organization.

• Cause
  Certain specified parent facility group(s) is incorrect or no longer exists.
• Countermeasure
  Confirm the parent facility group.

• Cause
  The designated parent facility group is either a lower level group or the same group the facility is being moved from.
• Countermeasure
  Confirm the destination parent facility group.

• Cause
  The currently logged-in user has not attended this appointment.
• Countermeasure
  Confirm the attendees list of this appointment.

• Cause
  The currently logged-in user is not permitted to add or edit repeating appointments with the following facility: ***.
• Countermeasure
  Use other facilities.
  If you want to change the permission for this facility, contact your system administrator or your Application administrator.

• Cause
  Cannot set because of the following reason:
  • The format of start date and time is not valid.
• Countermeasure
  Confirm whether or not the start date and time is correct.

• Cause
  Cannot set because of the following reason:
  • The format of end date and time is not valid.
• Countermeasure
  Confirm whether or not the end date and time is correct.

• Cause
  Adding a private appointment is prohibited.
• Countermeasure
  Contact your system administrator or your application administrator.

• Cause
  The customizable item was specified incorrectly, or the customizable item no longer exists.
• Countermeasure
  Confirm the target customizable items.

• Cause
  The item was specified incorrectly, or the item no longer exists.
• Countermeasure
  Confirm the target item.

• Cause
  The customizable item ID was specified incorrectly, or the customizable item ID no longer exists.
• Countermeasure
  Confirm the target customizable item ID.

• Cause
  The built-in item was specified incorrectly, or the built-in item no longer exists.
• Countermeasure
  Confirm the target built-in items.

• Cause
  A regular appointment is being edited as a repeating appointment.
• Countermeasure
  Please contact our official partners or your vendor.

• Cause
  A regular appointment is being edited as a repeating appointment.
• Countermeasure
  Please contact our official partners or your vendor.

• Cause
  Attend or leave is not allowed on tentative appointments.
• Countermeasure
  Please contact our official partners or your vendor.

• Cause
  Simultaneous operations on the same appointment are not allowed.
• Countermeasure
  Please contact our official partners or your vendor.

• Cause
  Drag and drop moving is disabled.
• Countermeasure
  Edit this appointment on the "Appointment details" screen.

• Cause
  The appointment type was specified incorrectly, or the appointment type no longer exists.
• Countermeasure
  Confirm the target appointment type.

• Cause
  Your system administrator does not allow users to attach files to appointments.
• Countermeasure
  Contact your system administrator.

• Cause
  The attachment was specified incorrectly or the attachment no longer exists.
• Countermeasure
  Confirm the target attachment.

• Cause
  The currently logged in user cannot view this file because the user does not have user right for this appointment.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The currently logged in user cannot edit this file because the user does not have user right for this file.
• Countermeasure
  Contact your system administrator or your Application administrator.

• Cause
  The specified version is incorrect.
• Countermeasure
  Confirm the target version.

• Cause
  The attendance feature is not allowed.
• Countermeasure
  Contact your system administrator.

• Cause
  Attendance is disabled for this appointment.
• Countermeasure
  Confirm the appointment.

• Cause
  You are not an attendee of this appointment.
• Countermeasure
  Confirm the appointment.

• Cause
  Facility usage request has been disabled by your system administrator.
• Countermeasure
  Contact your system administrator.

• Cause
  The operational administrative privileges for the facility are required to process the usage request.
• Countermeasure
  Contact your system administrator.

• Cause
  Once processed, the usage request cannot be reprocessed.
• Countermeasure
  Contact your system administrator.

• Cause
  The facility is not registered for this appointment.
• Countermeasure
  Contact your system administrator.

• Cause
  Facility usage request is available only for regular appointments.
• Countermeasure
  Contact your system administrator.

• Cause
  The facilities with usage request enabled cannot be used in tentative appointments.
  The facilities with usage request enabled：***
• Countermeasure
  Remove the facilities with usage request enabled from the appointment.

• Cause
  The operational administrative privileges for the facility are required to edit the repeating appointments that use the facilities with usage request enabled.
  The facilities with usage request enabled：***
• Countermeasure
  Contact your system administrator.

• Cause
  Purpose is required to use the facility with usage request enabled.
• Countermeasure
  Enter the purpose to use the facility.

• Cause
  Usage request has been enabled.
• Countermeasure
  Change to other facilities.

• Cause
  Purpose is required.
• Countermeasure
  Enter the purpose of the facility.

• Cause
  One or more attendees are required to reject the usage request.
• Countermeasure
  Check whether one or more attendees exist for the appointment.

• Cause
  You are attempting to add invalid data.
• Countermeasure
  Using the request data in the Facility usage requests, process again using the correct method.

• Cause
  "***" cannot be used for the login name.
• Countermeasure
  Confirm the login name you have specified.

• Cause
  "***" cannot be used for the item type.
• Countermeasure
  Confirm the item type you have specified.

• Cause
  "***" cannot be used for the item code.
• Countermeasure
  Confirm the item code you have specified.

• Cause
  Organizations and roles are not allowed to be selected.
• Countermeasure
  Specify only users for private watchers.

• Cause
  The operation on tentative appointments cannot be carried out.

• Cause
  Using the schedule response feature is not allowed.
• Countermeasure
  Contact your system administrator.

• Cause
  Attaching files is not allowed.
• Countermeasure
  Contact your system administrator.

• Cause
  The currently logged-in user does not have the right to access the specified facility group.

• Cause
  The following user(s) specified as recipients do not have permission to access the schedule: ***
• Countermeasure
  Remove the users listed in the Cause field (who do not have permission to access the schedule) from recipients, then post the comment.

• Cause
  The customizeName contains the invalid value.
• Countermeasure
  You can specify only alphanumeric characters and the period (.) in the customizeName.

• Cause
  The number of customizeName for one appointment exceeds the limit.
• Countermeasure
  You can register up to *** customizeName for one appointment.
  Contact your system administrator or the plug-in provider.
  Also, if you encounter this error, provide your feedback to us.

• Cause
  The currently logged-in user is not permitted to change this appointment.
• Countermeasure
  Please contact our official partners or your vendor.

• Cause
  The specified customizeName has already been registered.
• Countermeasure
  Please contact our official partners or your vendor.

• Cause
  The specified customizeName does not exist.
• Countermeasure
  Please contact our official partners or your vendor.

• Cause
  The length of *** exceeds the maximum characters allowed.
• Countermeasure
  The maximum length of *** is *** characters.
  Reduce the number of characters and try again.

• Cause
  The length of *** is less than the minimum characters required.
• Countermeasure
  The length of *** must be &*** character or more.
  Increase the number of characters and try again.

• Cause
  The format of *** is not valid.
• Countermeasure
  The *** is not valid.
  Contact your system administrator or the plug-in provider.

• Cause
  The required parameter for *** has not been specified.
• Countermeasure
  You must specify ***.
  Contact your system administrator or the plug-in provider.

• Cause
  The Web conference reservation could not be changed for the following reasons:
  • Conflicting reservations exist in Web conference
  • A value necessary for reservation was incorrectly specified
• Countermeasure
  Check your Web conference reservations.
  If no conflicting reservations exist, contact your system administrator.

• Cause
  The Web conference reservation could not be deleted for the following reasons:
  • Failed to log in to Web conference
  • An error occurred when communicating with Web conference
• Countermeasure
  Contact your system administrator.

• Cause
  The Web conference reservation could not be deleted for the following reasons:
  • Failed to log in to Web conference
  • An error occurred when communicating with Web conference
• Countermeasure
  Contact your system administrator.

• Cause
  The reservation information could not be obtained from Web conference for the following reasons:
  • Failed to log in to Web conference
  • An error occurred when communicating with Web conference
  • The conference reservation has been deleted
• Countermeasure
  Contact your system administrator.

• Cause
  The Web conference room could not be reserved for the following reasons:
  • Failed to log in to Web conference
  • An error occurred when communicating with Web conference
  • Conflicting reservations exist in Web conference
  • A value necessary for reservation was incorrectly specified
• Countermeasure
  Contact your system administrator and try again.

• Cause
  An error occurred when logging in to Web conference.
• Countermeasure
  Check the condition of the Web conference server.

• Cause
  Multiple facilities are selected for the Web conference.
• Countermeasure
  Select only one facility.

• Cause
  A past date or time is specified.
• Countermeasure
  Specify a future date and time.

• Cause
  No value is specified.
• Countermeasure
  To reserve a Web conference room, enter a value.

• Cause
  The combined character count of the appointment type and subject exceeds n characters.
• Countermeasure
  Reduce the number of characters and try again.

• Cause
  No value is specified.
• Countermeasure
  Specify a non-empty string.

• Cause
  The Memo exceeds n levels.
• Countermeasure
  Reduce the number of characters and try again.

• Cause
  A user with no Web conference e-mail address specified is selected.
• Countermeasure
  Select users who already have Web conference e-mail addresses.

• Cause
  Password could not be set for the following reasons:
  • The passwords do not match
  • One or more of the characters are not a single-byte alphanumeric character
  • Incorrect character count
• Countermeasure
  Alphanumeric character Set: 6 to 16.

• Cause
  The character count of the name exceeds n characters.
• Countermeasure
  Reduce the number of characters and try again.

• Cause
  The character count of the e-mail address exceeds n characters.
• Countermeasure
  Reduce the number of characters and try again.

• Cause
  Name and e-mail address are not specified.
• Countermeasure
  Specify a name and an e-mail address.

• Cause
  Web conference e-mail address is not specified in your Personal settings.
• Countermeasure
  To reserve a Web conference room, set a Web conference e-mail address.

• Cause
  You can invite up to n participants.
• Countermeasure
  Reduce the number of attendees.

• Cause
  You can invite up to n participants.
• Countermeasure
  Reduce the number of attendees or external invitees.

• Cause
  The maximum number of participants has not been set.
• Countermeasure
  Contact your system administrator.

• Cause
  Facilities cannot change.
• Countermeasure
  Set specify the previous facilities.

• Cause
  You cannot specify future date.
• Countermeasure
  You have to specify the past date.

• Cause
  Start date and time cannot change.
• Countermeasure
  Set specify the previous beginning date.

• Cause
  You can invite up to n participants.
• Countermeasure
  You cannot attend this appointment.

• Cause
  Web conference e-mail address is not specified in your Personal settings.
• Countermeasure
  To attend the Web conference, set a Web conference e-mail address in your Personal settings.